Scientific Reports (May 2017)

High Performance and Low power Monolithic Three-Dimensional Sub-50 nm Poly Si Thin film transistor (TFTs) Circuits

  • Tsung-Ta Wu,
  • Wen-Hsien Huang,
  • Chih-Chao Yang,
  • Hung-Chun Chen,
  • Tung-Ying Hsieh,
  • Wei-Sheng Lin,
  • Ming-Hsuan Kao,
  • Chiu-Hao Chen,
  • Jie-Yi Yao,
  • Yi-Ling Jian,
  • Chiung-Chih Hsu,
  • Kun-Lin Lin,
  • Chang-Hong Shen,
  • Yu-Lun Chueh,
  • Jia-Min Shieh

DOI
https://doi.org/10.1038/s41598-017-01012-y
Journal volume & issue
Vol. 7, no. 1
pp. 1 – 11

Abstract

Read online

Abstract Development of manufacture trend for TFTs technologies has focused on improving electrical properties of films with the cost reduction to achieve commercialization. To achieve this goal, high-performance sub-50 nm TFTs-based MOSFETs with ON-current (Ion)/subthreshold swing (S.S.) of 181 µA/µm/107 mV/dec and 188 µA/µm/98 mV/dec for NMOSFETs and PMOSFETs in a monolithic 3D circuit were demonstrated by a low power with low thermal budget process. In addition, a stackable static random access memory (SRAM) integrated with TFTs-based MOSFET with static noise margins (SNM) equals to 390 mV at VDD = 1.0 V was demonstrated. Overall processes include a low thermal budget via ultra-flat and ultra-thin poly-Si channels by solid state laser crystallization process, chemical-mechanical polishing (CMP) planarization, plasma-enhanced atomic layer deposition (ALD) gate stacking layers and infrared laser activation with a low thermal budget. Detailed material and electrical properties were investigated. The advanced 3D architecture with closely spaced inter-layer dielectrics (ILD) enables high-performance stackable MOSFETs and SRAM for power-saving IoT/mobile products at a low cost or flexible substrate.