Energy Reports (Nov 2022)
Physical experiment on the feasibility of variable-gradient drilling method based on downhole separator
Abstract
The special temperature-pressure environment and narrow safety density window of the deepwater formation pose a great challenge to wellbore pressure control during drilling. The downhole variable-gradient drilling method is an effective idea to solve this challenge. However, previous studies mainly focused on the theoretical adaptability analysis of this method, while the experimental feasibility verification has not yet been reported. In this paper, based on the segmental control principle of wellbore fluid density, we set up an indoor physical experiment system to investigate the feasibility of variable-gradient drilling method based on downhole cyclone separator. Using this experimental system, we investigated the effect of drilling fluid physical parameters, hollow glass microsphere (HGMS) performance parameters and engineering parameters on the separator separation efficiency, wellbore pressure gradient and HGMS slip rate. The experimental results revealed that the separator could separate the HGMSs into the annulus from the fluid mixture in the drill pipe. The separation efficiency increased with the increase in the HGMS diameter, HGMS concentration and flow rate, while decreased with the increase in the HGMS density and fluid viscosity. The HGMS density and HGMS concentration were the key factors affecting the annulus pressure gradient value, and the separator separation efficiency was the main factor determining the difference of the annulus pressure gradient. The HGMS slip rate was highly sensitive to its diameter and fluid viscosity, and a combination of optimal HGMS diameter and fluid viscosity could avoid the drilling risk caused by the HGMS slippage. Therefore, the variable-gradient drilling method based on downhole separator is feasible, which is able to create two or more pressure gradients in the annulus. This study could provide guidance for the optimization of key parameters and the development of equipment related to the variable-gradient drilling.
