Numerical simulation and structural optimization of spiral finned tube thermal energy storage

Abstract

Thermal energy storage (TES) has emerged as a promising solution to enhance nuclear safety by passively removing decay heat during reactor shutdown and accidents, thus preventing overheating of the reactor core and protecting the integrity of containment barriers. The research of TES with different structures has broad application prospects and practical significance. In this study, the melting process of phase change material (PCM) in various TES structures was simulated by the numerical simulation method in two and three dimensions. The mechanism of gravity-driven natural convection enhancing heat transfer was revealed. The effects of different TES structures, fin pitch, fin height, and fin thickness on heat transfer performance were studied. The results showed that many vortices formed by liquid PCM are the main reason for enhancing the natural convection. Adding fins could greatly accelerate the heat storage process. The melting time of PCM in annular and spiral finned tube TES was 47.3% and 61.3% less than that in smooth tube TES, respectively. In the present study, the heat transfer effect was enhanced as the spiral fin pitch became small, the fin height increased and the fin thickness increased. Two opposite effects of fin structure on the natural convection were revealed: (1) positive effect provided by heat transfer enhancement and (2) negative effect produced by blockage.

Keywords

• Phase change material
• Thermal energy storage
• Numerical simulation