PMMA Lens Arrays for Micro Concentrator Solar Cells Produced by Hot Embossing

Abstract

The rising energetical needs of modern society have been increasingly pushing for the improvement in energy efficiency. Thin-film solar cell technology encompasses several types of devices whose purpose is to gather energy emitted from a luminous source and convert it into usable electrical energy for a variety of applications, particularly low-powered devices. Micro concentrator solar cells are promising devices to solve the materials availability problem and address the power conversion efficiency simultaneously. Since the energy conversion efficiency for this type of solar cell is not particularly high, it stands out to benefit greatly from using an optical concentrator element to increase the light intensity reaching the active surface. The micro-concentrator element is comprised of a micro-lens array, which can be manufactured by different technologies, such as polymer injection moulding, extrusion, or hot embossing. In this work, we explore how hot embossing can be used to inexpensively produce spherical lenses with Ø 1 mm in an array according to micro concentrator solar cell requirements. A simple compression system coupled with an infrared lamp heat chamber was used to emboss PMMA disks. Different mould insert manufacturing technologies were used and different hot embossing parameters were assessed. The process replicability of the micro-lens cavities was determined by infinite focus microscopy and optical microscopy. The most promising lens array was achieved with a mould insert produced by μ-EDM (with Ra and Rz values of 0.6 μm and 4.58 μm, respectively).

Keywords

• hot embossing
• pmma
• micro concentrator solar cells
• edm
• cnc