Experimental dataset from a round robin test of contact parameters and hysteresis loops for nonlinear dynamic analysis

Abstract

This data article describes the extensive experimental dataset of friction hysteresis measured during the round robin test of the original research article [1]. The round robin test was performed on the two different fretting rigs of Imperial College London and Politecnico di Torino, and consisted of recording comparable friction hysteresis loops on specimen pairs manufactured from the same batch of raw stainless steel. The reciprocating motion of the specimens was performed at room temperature under a wide range of test conditions, including different normal loads, displacement amplitudes, nominal areas of contact and excitation frequencies of 100 Hz and 175 Hz. Friction forces and tangential relative displacements for each specimen pair were recorded and stored as hysteresis raw data. Each hysteresis loop was post-processed to extract friction coefficient, tangential contact stiffness and energy dissipated, whose evolution with wear was thus obtained and stored as well. MATLABⓇ scripts for post-processing and plotting data are included too.The dataset can be used by researchers as a benchmark to validate theoretical models or numerical simulations of friction hysteresis models and wear mechanisms, and also to study the physics of friction hysteresis and its contact parameters. This friction data can also be used as input in models for nonlinear dynamics applications as well as to provide information on the contact measurement uncertainty under fretting motion. Other applications include using this data as a training set for machine learning applications or data-driven models, as well as supporting grant applications.

Keywords

• Hysteresis loops
• Friction coefficient
• Contact stiffness
• Reciprocating motion
• Fretting
• Nonlinear dynamics