Effect of microstructure on tensile properties, impact toughness and fracture toughness of TC21 alloy

Abstract

This paper aims to reveal how multi-level lamellar microstructure influences strength and toughness of TC21 alloy after different solution treatment ranging from 980 °C to 1020 °C and annealed at 770 °C. Microstructural characterization was performed by using optical microscopy (OM), scanning electron microscopy (SEM), electron backscatter diffraction (EBSD), transmission electron microscope (TEM), and image analysis software. Results show that the size of β grains (dβ) grows significantly while α colony (dc) increases slowly with the solution temperature increases. Meanwhile, α plate (dα) presents an opposite tendency. In addition, the Hall-Petch formula was applied to reveal the relationship between multi-level microstructure (including prior β grain, α colony and α plate) and strength and toughness of the alloy; α colony could be a key microstructure unit correlated to strength of the alloy. Besides, α plate obeys the Hall-Petch relationship with toughness. Meanwhile, it is confirmed by EBSD that more α plate were cut with the increasing size of the multi-level lamellar microstructure. The larger α colony size is, the stronger the interaction between the crack and α plate. Thus, α plate was regarded as the key microstructure unit for influencing toughness because it strongly hinders the crack initiation and growth. Keywords: TC21 alloy, Multi-level microstructure, Correlated microstructure unit, Strength, Toughness