Fabrication and Optical Characterization of Polymeric Aspherical Microlens Array Using Hot Embossing Technology

Abstract

Hot embossing has been widely used in fabricating microlens arrays because of its low cost, high efficiency, and high quality. The process parameters such as molding temperature, molding pressure, and holding temperature affect the microlens array’s replication quality. This work selected the stainless steel S136H tool steel as the mold material to process an aspheric microlens array structure through ultra-precision milling. Polymethyl methacrylate (PMMA) microlens arrays with different surface replication were prepared by controlling the molding temperature, molding pressure, and holding temperature. By analyzing the surface quality, contour replication, and optical imaging of hot-embossed samples, the optimal molding temperature of PMMA for optimal replication of aspheric lens arrays was determined as 130 °C. Besides, the internal elastic recovery of PMMA affected the dimensional accuracy and optical performance of the lens. The results showed that, at the molding pressure of 400 N and the holding temperature of 60 °C, the surface defects were eliminated, and the aspheric lens array had perfect replication with a profile deviation of only 4 μm. The aspheric microlens array with good quality was eventually achieved by these optimal process parameters, which provides a foundation for producing aspheric microlens arrays in a low-cost and high-efficiency way.

Keywords

• hot embossing
• aspherical micro lens array
• optical imaging
• process conditions