A finite element analysis on comparing the stability of different posterior fixation methods for thoracic total en bloc spondylectomy

Abstract

Abstract Objective To compare the spinal stability with different fixation methods after thoracic TES using finite element analysis Methods The spinal finite element model was established from a healthy volunteer, and the validity was verified. The models of T8 thoracic total en bloc spondylectomy (TES) with and without artificial vertebral body were established combination with different fixation methods: the first was long segment fixation with fixed segments T5–7, T9–11; the second was short segment fixation with fixed segments T6–7, T9–10; the third was modified short segment with a pair of vertebral body screws on T7 and T9 added on the basis of short segment fixation. The motions of each model in standing state were simulated in software. The range of motion (ROM) and internal fixation stress changes were analyzed. Results When anterior support was effective, the three fixation methods could effectively maintain the stability of the spine. However, when anterior support failed, the ROM of the long segment fixation group and the short segment fixation group in the flexion-extension directions was significantly higher than that of when the anterior support existed, while the modified short segment fixation group had no significant changes. Meanwhile, the stress of internal fixation in the long segment fixation group and the short segment fixation group were greatly increased. However, there were no significant changes in modified short segment fixation group. Conclusion After TES, the presence of the thoracic cage gives partial anterior stabilization. When the anterior support failed, the modified short segment fixation method can provide better stability.

Keywords

• Thoracic vertebra
• Thoracic cage
• TES
• Spinal stability
• Finite element analysis