The Hydrodynamic Simulation of Karst Water Under Deep Coal Mining and Fault Conditions: A Case Study of the Zhuxianzhuang Mine in Northern Anhui

Abstract

As shallow coal resources in China become increasingly depleted, deep coal mining in complex geological areas has become an inevitable trend. However, the technical challenges associated with deep mining are becoming more significant, particularly the issues related to mine water hazards. This study utilized hydrogeological data from the III3 Mining Area in the Zhuxianzhuang Coal Mine, Anhui Province, and employed GMS (Groundwater Modeling System) software to construct a numerical karst water flow model under deep mining conditions. By simulating variations in the flow field, the study verified the drainage potential of the limestone water at the base of Seam 10 and assessed the water conductivity and connectivity of the F22 fault. The following conclusions were obtained: The simulation effectively captured the formation process of the karst water drawdown cone in the study area. The observed water level variations in different monitoring wells aligned well with the engineering reality after validation. The limestone water at the base of Seam 10 in the III3 Mining Area exhibited good transmissivity, weak recharge, and high drainage potential. Although the F22 fault is a normal fault with a maximum displacement of 550 m, offsetting formations from Seam 3 to the Ordovician limestone, its connectivity and water conductivity are poor, exhibiting significant water-blocking properties. The specific capacity (q) ranges from 1.40 × 10−4 to 3.26 × 10−3 m3/(s·m), and the hydraulic conductivity (K) ranges from 2.10 × 10−5 to 6.80 × 10−5. Under deep coal mining conditions, the extraction of coal disturbs the underlying limestone, generally resulting in an increase in its permeability coefficient compared to pre-mining conditions. The permeability coefficient (K) from the measured data before mining impact ranged from 0.000067 to 0.0022, while the simulated values after mining impact ranged from 0.0021 to 0.09. Additionally, mining activities affect the hydraulic head, flow rate, and flow paths of the karst water; the floor karst water is easily drainable, effectively reducing water pressure and the inrush coefficient, thus lowering water hazard risks. Although the mining area is affected by the large F22 fault, its water-resisting properties under sufficient drainage conditions prevent direct connectivity between the coal seam and the aquifer, avoiding water hazards. As global coal resources continue to be exploited, deep mining will inevitably become a common trend in coal extraction worldwide. This study develops a hydrogeological model tailored to deep mining under fault conditions, offering a solid theoretical foundation and practical reference for the prevention and management of mine water hazards on a global scale. This advancement contributes to the development of sustainable mining practices across the global industry.

Keywords

• deep coal mining
• GMS
• numerical simulation
• limestone water
• hydrodynamic simulation
• mine water hazard