Comparison of Various Factors Affected TID Tolerance in FinFET and Nanowire FET

Abstract

Analysis of the radiation effects in a device is of great importance. The gate all around (GAA) structure that contributes to device scaling not only solves the short channel effects (SCE) problem but also makes the device more resistant in radiation environments. In this article, the total ionizing dose (TID) simulation of nanowire FET (NW) and FinFET was performed. Both these devices were compared and analyzed in terms of the shift of threshold voltage (VT). The channel insulator was composed of two materials, SiO2 and HfO2. To improve the accuracy of the simulation, the interfacial trap parameter of SiO2 and HfO2 was applied. Based on the simulation result, the NW with a larger oxide area and larger gate controllability showed less VT shift than that of the FinFET. It was therefore proved that NW had better TID resistance characteristics in a radiation environment. The gate controllability was found to affect the TID effect more than the oxide area. In addition, we analyzed the manner in which the TID effect changed depending on the VDD and channel doping.

Keywords

• total ionizing dose (TID)
• radiation
• threshold voltage (V_T)
• nanowire FET
• gate-all-around (GAA)
• FinFET
• TID tolerance