New algorithm to simulate fracture network propagation using stationary and moving coordinates in naturally fractured reservoirs

Abstract

Abstract Influenced by natural fractures, fracture networks may be created when hydraulic fractures propagate in naturally fractured reservoirs. Simulating fracture network propagation is crucial to fracture design. In this paper, a two‐dimensional mathematical model for the direct simulation of fracture network propagation that considers fluid filtration and reservoir fluid flow is developed, and a simulation method is proposed based on the coupled flow idea of natural fractures and matrices in dual‐porosity media. The model uses dynamic coordinates to represent the extended hydraulic fracture network and static coordinates to describe natural fractures that have not been activated. The activation of natural fractures by a hydraulic fracture is determined according to the hydraulic fracture propagation scenario after an intersection with natural fractures. The geometric shape and size of the network fracture are obtained by changing the size of the simulated area and solving the mass balance, fracture width, and reservoir fluid flow equations numerically in a coupled manner. After validating the new model, a parameter sensitivity analysis is conducted to study the effects of injected fluid volume, fracture height, fracture spacing, elastic modulus, horizontal principal stress difference, pumping rate, and fracturing fluid viscosity on the fracture network shape, fracture network size, average fracture width, and fracture‐reservoir contact area. The numerical results indicate that the model can be directly used to simulate the propagation of fracture networks. The volume of injected fluid is the most critical factor affecting the fracture network size. Increasing the fluid viscosity and injection rate can increase the width of the fracture network and the average width of a secondary fracture. However, the total contact area of the reservoir and fracture will decrease, and the reservoir‐fracture contact area and fracture network size will increase with a decrease in the horizontal stress difference and increase in elastic modulus. Decreasing a fracture's height can significantly increase the size of the fracture network and reservoir‐fracture contact area.

Keywords

• fluid filtration
• fracture network
• fracture propagation
• fractured reservoir
• hydraulic fracturing