Previous Research Works on Reinforced Concrete Curved Beams

Abstract

The current research work summarizes some previous research works on horizontally curved beams. Because of curvature, torsional effects in the analysis and design should be included. Diameter of ring beam, number of supports, beam width, compressive strength of the concrete, and bearing plate width. Which can be summarized from previous studies is that increasing diameter of ring by about 25-75% decreases the capacity load by about 14-36%, while increasing number of supports by about 33-100%, beam width by about 25-75%, compressive strength of concrete by about 24-76%, and bearing plate width by about 25-75% increases the capacity load by about 62-189%, 25-75%, 24-76%, and 5-16%, respectively due to the beam section increase and/or its properties. Frequently, reinforced concrete deep ring beams exhibit shear failure in a manner similar to straight beams. Strut and tie model (STM) and plastic analysis are useful tools for efficiently analyzing ring or curved deep beams. In addition, the nonlinear three-dimensional finite element modeling is typical for predicting the deep curved beams strength and behavior.

Keywords

• previous research works
• reinforced concrete
• curved
• ring
• beams