Synergistic effect of carbon nanotubes and carbon black as nanofillers of silicone rubber pressure sensors

Abstract

Pressure sensors based on nitrogen-doped bamboo-shaped carbon nanotubes (N-BCNT) and carbon black (CB) as nanofillers, polyurethane foam (PU) as supporting substrate, and silicone rubber (SR) as a matrix were prepared. Dip coating was used to coat PU with 0.44 wt% nanofiller, including different mixing ratios of N-BCNT and CB (5:5; 6:4; 7:3; 8:2; 9:1). Then, the coated PU is impregnated in SR to fill the pores. Due to the higher aspect ratio of the N-BCNT, it contributes more to improving the electrical conductivity in the composites, while the CB fills the smaller gaps. The prepared sensors were tested in various applications, and it was found that the optimal mixing ratio of nanofillers was 7:3 N-BCNT:CB. Thus, a multifunctional pressure sensor has been developed successfully with excellent flexibility and good resilience, suitable for motion detection and finger touch applications. The pressure sensor showed high sensitivity, and the ability to detect a wide range of pressures. The sensor exhibited success in a range of applications, paving the way for its potential use in various fields in the future, such as wearable devices, prosthetics, robotic devices, and medical devices.

Keywords

• N-BCNT
• Polyurethane
• Composite
• CB
• Dip coating
• CNT