Clamp Nonlinear Modeling and Hysteresis Model Parameter Identification

Abstract

Based on the Bouc-Wen model, a nonlinear hysteretic restoring force model is established with dynamic equations. The hardening and softening of the material after reaching the yield limit are described by the nonlinear restoring force-displacement hysteretic curve. The Gamultiobj algorithm and the group search optimization (GSO) algorithm are used to fit and identify the material softening and hardening hysteresis curves, respectively. The effectiveness of the optimization algorithm for identifying the parameters of the hysteretic model is verified, and the optimization effects of the two algorithms are compared. The results show that the Gamultiobj algorithm has better parameter identification ability and curve fitting ability for the hysteretic model. Then, the hysteresis curve describing the nonlinear characteristics of a clamp is obtained through the static stiffness experiment of the clamp. The experimental curve is fitted by the Gamultiobj algorithm. As a result, the nonlinear Bouc-Wen model parameters of the clamp are obtained, and the stiffness and damping of the clamp are recognized. The distribution statistics of the obtained parameters are performed, and it is found that each parameter satisfies a certain probability distribution, which indicates that the parameter identification result is reasonable.

Keywords

• Hysteresis model
• parameter identification
• clamp
• nonlinear