Study on the key parameters of ice particle air jet ejector structure

Abstract

Abstract Existing ice particle jet surface treatment technology is prone to ice particle adhesion during application, significantly affecting surface treatment efficiency. Based on the basic structure of the jet pump, the ice particle air jet surface treatment technology is proposed for the instant preparation and utilization of ice particles, solving the problem of ice particle adhesion and clogging. To achieve efficient utilization of ice particles and high-speed jetting, an integrated jet structure for ice particle ejection and acceleration was developed. The influence of the working nozzle position (L d), expansion ratio (n), and acceleration nozzle diameter ratio (D n) length-to-diameter ratio (L n) on the ice particle ejection and acceleration was systematically studied. The structural parameters of the ejector were determined using the impact kinetic energy of ice particles as the comprehensive evaluation index, and the surface treatment test was conducted to verify the results. The study shows that under 2 MPa air pressure, the ejector nozzle parameters of n = 1.5, D n = 4.0, L d = 4, and L n = 0 mm can effectively eject and accelerate the ice particles. The aluminum alloy plate depainting test obtained a larger paint removal radius and resulted in a smoother aluminum alloy plate surface, reducing the surface roughness from 3.194 ± 0.489 μm to 1.156 ± 0.136 μm. The immediate preparation and utilization of ice particles solved the problems of adhesion and storage in the engineering application of ice particle air jet technology, providing a feasible technical method in the field of material surface treatment.

Keywords

• Surface treatment
• Paint removal technology
• Ice particle jet
• Jet pump
• Nozzle design