Chemical Imaging of the Polylactic Acid − Wood Adhesion Interface of Bonded Veneer Products

Abstract

The increasing use and potential of polylactic acid (PLA) in wood-based composite materials due to its greater performance over common polyolefins provides the justification for a closer examination of the PLA−wood adhesion performance. In PLA-bonded laminates and composites, the optical differentiation between PLA polymer and wood is not possible and necessitates complex techniques such as fluorescence microscopy to characterize the PLA adhesion interface. In this study, spatial chemical imaging via FTIR analysis has been successfully applied to directly identify PLA bondlines within PLA-bonded veneer laminates and to determine the migration of semi-crystalline and amorphous PLAs from the bondline into the wood structure. This method uses involved point contouring line spectra over the bondline area to distinguish the PLA polymer from the wood. From this quantitative analysis, it is revealed that bondline thickness and PLA penetration values depend on pressing temperature, and this has implications for the reinforcement of the adhesion interface and the bondline performance. Furthermore, in developing a methodology for this assessment, this spatial chemical imaging approach can equally be applied to other polyester, amide, and urethane systems used to bond wood laminates.

Keywords

• polylactic acid
• PLA
• laminates
• plywood
• birch
• chemical imaging