Study on the stress distribution of surrounding rock and the inclination effect of gangue filling features in steeply dipping mining sites

Abstract

The dip angle of coal seam is one of the important factors that cause the complexity and particularity of the mining dynamic behavior of the large dip angle stope and induce many disasters and accidents. In order to reveal the influence law of the dip angle of coal seam on the control of surrounding rock and the characteristics of mine pressure in the large dip angle stope, the research method of physical similarity simulation and numerical calculation is adopted. Based on a comprehensive analysis of the features of roof crack and gangue sliding and rolling filling in steeply dipping working faces, a finite element discrete element (FLAC2D-PFC2D) coupling algorithm is used to establish a coupled numerical model of high angle mining areas with different inclinations. The stress distribution of surrounding rock and the inclination effect of gangue filling features in steeply dipping mining areas are studied. The results show the following points. ① Under the action of mining, the stress distribution of the surrounding rock in the roof and floor of the high angle mining area is asymmetric arched. As the dip angle of the coal seam increases, the range of the arched vertical stress release zone and the degree of upward displacement gradually increase. But the range and force value of the horizontal stress release zone gradually decrease. Both vertical and horizontal stresses are prone to stress concentration at the top and bottom of the working face. But the maximum concentrated stress value will decrease with the increase of coal seam inclination angle. The stress magnitude and transmission direction inside the roof and floor of the steeply dipping working face exhibit asymmetric features. As the coal seam dip angle increases, the stress arch height of the working face roof and floor gradually decreases. The transmission direction of surrounding rock stress is mainly towards the mining space, and gradually deviates from the initial approximate vertical direction towards the vertical direction of the working face. ② The roof crack of the working face and the sliding and filling of gangue exhibit temporal and regional evolution features, and exhibit a certain dip angle effect with the change of coal seam dip angle. As the inclination angle of the coal seam increases, the initial breaking position of the direct roof will gradually shift towards the upper area of the working face. At the same time, due to the increased force of gravity along the inclination direction of the working face, the filling degree of the gangue along the inclination direction will be more dense. But the filling length will decrease. As the inclination angle of the coal seam increases, the degree of crack and the range of voids in the high-level rock layers in the upper and middle areas of the working face will also increase. ③ The mechanism of the action of gangue on the surrounding rock in the goaf is mainly reflected in providing lateral stress and vertical support, and is greatly affected by the gravity of gangue, which will show a strong inclination effect with the change of coal seam inclination angle.

Keywords

• steeply dipping coal seam
• surrounding rock stress
• gangue filling
• angle effect
• mining induced stress
• roof crack