Vibration Measurement of a Metal Sheet Using Single-Camera Digital Image Correlation with Projection Components

Abstract

Digital image correlation has emerged as a popular method for the dynamic performance measurement of metallic and polymer sheets, owing to the benefits of being a noncontact, full-field, and high-precision method. Two or more high-speed cameras are required for full-field vibration measurements with three-dimensional digital image correlation, which is generally costly. Perpendicular view to the specimen surface is conventional in two-dimensional digital image correlation, and the out-of-plane displacement is regarded as a part of systematic errors. In this study, a single view method was implemented with no complex optical settings. The full-field vibration displacement of the metal sheet was measured with projection components, and the first four orders of displacement modes were identified. Finite element analysis and traditional experimental modal analysis were then implemented to validate the effectiveness and accuracy of the proposed approach. The results show that the dynamic parameters, including the natural frequencies and mode shapes, were well consistent. Meanwhile, there is a significant difference in the length of mode shape vectors. The number of measurement points in the proposed method is 2016, which is far more than the number of measurement points in the traditional experimental modal analysis. This would be convenient and beneficial for damage identification towards thin-wall parts including turbine blade with the continuum hypothesis of mode shapes and a single-camera DIC system. It is worth noting that this is effective with conditions of small deformation vibration and no rigid-body rotation.