Selective Catalytic Hydrogenation of Vegetable Oils over Copper-Based Catalysts Supported on Amorphous Silica

Abstract

This work aims to study the selective catalytic hydrogenation of vegetable oils to maximize oleic acid content and expand the range of non-edible uses. Oleic acid (C18:1) is suitable for use as a biodegradable lubricant and is a building block in producing polymers and plastics from renewable resources. The challenge is the synthesis of heterogeneous catalysts, allowing for a maximum yield of C18:1 and low formation of the corresponding saturated acid (stearic acid). New copper-based catalysts on silica were synthesized via two synthesis methods: hydrolysis precipitation and ammonia-evaporation. Experimental tests were carried out at a lab scale operating in a semi-batch mode. The best conversion reached 90% for C18:3 and 80% for C18:2 HP Cu-silica catalyst results, the best candidate for an industrial case study. Good results were obtained in the selectivities of oleic acid production and cis/trans isomers ratio. The modified return on the investment of the designed hydrogenation plant provides the revenues of the capital costs in less than one year.

Keywords

• selective catalytic hydrogenation
• copper-based catalysts
• oleic acid