Comparative Study of the Thermal and Hydraulic Performance of Supercritical CO₂ and Water in Microchannels Based on Entropy Generation

Abstract

The excellent thermophysical properties of supercritical CO2 (sCO2) close to the pseudocritical point make it possible to replace water as the coolant of microchannels in application of a high heat flux radiator. The computational fluid dynamics (CFD) method verified by experimental data is used to make a comparison of the thermal hydraulic behavior in CO2-cooled and of water-cooled microchannels. The operation conditions of the CO2-based cooling cases cover the pseudocritical point (with the inlet temperature range of 306~320 K and the working pressure of 8 MPa), and the water-based cooling case has an inlet temperature of 308 K at the working pressure of 0.1 MPa. The channel types include the straight and zigzag microchannels with 90°, 120°, and 150° bending angles, respectively. The analysis result shows that, only when the state of CO2 is close to the pseudocritical point, the sCO2-cooled microchannel is of a higher average heat convection coefficient and a lower average temperature of the heated surface compared to the water-cooled microchannel. The entropy generation rate of the sCO2-cooled microchannel can reach 0.58~0.69 times that of the entropy generation rate for the water-cooled microchannel. Adopting the zigzag structure can enhance the heat transfer, but it does not improve the comprehensive performance represented by the entropy generation rate in the sCO2-cooled microchannel.

Keywords

• heat transfer
• entropy generation rate
• supercritical CO₂
• computational fluid dynamics
• microchannel