Effect of Titanium Dioxide Particles on the Thermal Stability of Silica Aerogels

Abstract

Silica aerogels exhibit a unique nanostructure with low thermal conductivity and low density, making them attractive materials for thermal isolation under extreme conditions. The TiO2 particle is one of the common industrial additives used to reduce the thermal radiation of aerogel composites under high-temperature environments, but its influence on thermal resistance is almost unknown. Herein, we report the effect of TiO2 nanoparticles with different crystal phases and different sizes on the thermal stability of silica aerogel composites. By adding TiO2 nanoparticles, the aerogel can significantly resist collapse at high temperatures (up to 1000 °C). And compared with the rutile phase TiO2, the anatase phase TiO2 shows much higher temperature resistance performance, with shrinkage of only one-sixth of the rutile phase after 800 °C treatment. Interestingly, energy-dispersive spectrometer mapping results show that after 800 °C treatment, silica nanoparticles (NPs) are squeezed out in between anatase TiO2 particles, which resists the coarsening of silica NPs and ultimately enhances the stability of aerogel composites. The optimal anatase phase TiO2-doped silica aerogel demonstrates the integrated properties of crack-free morphology (2.84% shrinkage), low thermal conductivity (29.30 mW/(m·K)) and low density (149.4 mg/cm3) after 800 °C treatment. This study may provide new insights for developing oxide-doped silica aerogels with both high-temperature resistance and low thermal radiation.

Keywords

• silica aerogel
• titanium dioxide particle
• different crystal phase
• high-temperature resistance
• growth mode