Research on the diffusion plugging mechanism of flowing water grouting slurry in karst pipelines

Abstract

Abstract Among the many adverse geological disasters, the surge water disaster in karst areas causes the greatest loss to underground engineering construction, so it is necessary to carry out relevant research on the management of surge water disaster in karst pipelines. This study presents the creation of an oily epoxy resin magnetic convergence grouting material (OEMS) specifically developed to prevent water infiltration in pipelines. A self-designed visual karst pipeline grouting simulation system was used to conduct an experimental study on the diffusion and plugging behavior of magnetic slurry grouting. A model was constructed to simulate the migration of a magnetic slurry in water inrush circumstances. The model is based on the theory of slurry diffusion and the concept of magnetic adsorption. The results suggest that:(i) The best performance in grouting sealing is achieved when the ratio of new OEMS epoxy resin A liquid to B liquid is 2:1, and the blending ratio of flyash and Fe3O4 powder falls between 25 and 55%. (ii) The primary and secondary correlations among the parameters that affect the rate of change in flow rate, plugging pressure, and slurry retention rate are as follows: Hydrodynamic velocity has the greatest correlation, followed by plugging length, Fe3O4 power ratio, and flyash mixture ratio. (iii) The validity of the model is verified by comparing empirical observations with calculated theoretical values.

Keywords

• Karst pipeline
• Grouting sealing
• Simulation test
• Plugging mechanism