Optimization of Activated Carbon Fiber Preparation from Hemp Fiber through Dipotassium Hydrogen Phosphate for Application of Thermal Storage System

Abstract

With significant benefits over many other commercialised thermal storage methods, activated carbon fiber (ACF) is believed to be among the finest biosorbents for adsorbent purposes. If correctly made, it is an outstanding mesoporous lightweight material with micropores and, in most cases, no micropores. ACF’s higher bulk densities and great dynamic capacity demonstrate its value and are used in adsorbent technologies. The present study’s primary goal is to create active carbon fiber from organic hemp fiber. The following parameters were selected: (i) activating temperatures, (ii) activating timing, (iii) carbonization temperature, (iv) activating ingredient %ages, and (v) speed of activation temperature, all with four levels to achieve the goal. Taguchi optimization techniques were used to optimize the adsorbent characteristics. The current study used an L16 orthogonal array to accomplish that improvement. According to the previous Taguchi, the optimal conditions were 300°C combustions, insemination with 22.5% w/v K2HPO4 solution, and activating at 800°C for 3 hours at 20°C/min. The greatest contribution is 54.75%, followed by the rate of temperature activation at 23.35%, carbonated temperature at 10.14%, duration of stimulation at 8.82%, and H3PO4 concentrations at 2.94%. The results show that the activation temperature and rate of the temperature of activations are the essential elements in the current study’s accomplishment of the best adsorption capacities.