Design and Investigation of a Dynamic Auto-Adjusting Ejector for the MED-TVC Desalination System Driven by Solar Energy

Abstract

Ejectors have been widely used in multi-effect distillation, thermal vapor compression (MED-TVC) desalination systems due to their simple structures and low energy consumption. However, traditional fixed geometry ejectors fail to operate under unstable working conditions driven by solar energy. Herein, a dynamic auto-adjusting ejector, equipped with a needle at the nozzle throat, is proposed to improve the ejector’s performance under changeable operating conditions. A two-dimensional computational fluid dynamics (CFD) model is built to analyze the performance and flow field of the ejector. It is found that the achievable entrainment ratio gradually increases as the needle approaches the nozzle, and the entrainment ratio of the ejector is relatively stable, varying slightly between 1.1–1.2 when the primary pressure changes from 2.5 to 4 bar. Besides, the performance comparison between the proposed ejector and the traditional ejector is studied under the same primary pressure range. The entrainment ratio of the designed ejector was 1.6 times higher than that of the conventional ejector at a primary pressure of 2.5 bar. Furthermore, the average entrainment ratio of the designed ejector is 1.14, as compared to 0.84 for the traditional ejector. Overall, the proposed auto-adjusting ejector could be potentially used in MED-TVC desalination systems under variable conditions.

Keywords

• auto-adjusting ejector
• MED-TVC
• CFD model
• retractable needle
• solar energy