Exploration of cephalexin adsorption mechanisms onto bauxite and palygorskite and regeneration of spent adsorbents with cold plasma bubbling

Abstract

Abstract The aim of the present study was the direct comparison of two popular minerals, bauxite and palygorskite, as adsorbents for the removal of cephalexin (CPX) from aqueous solutions and the regeneration of the spent adsorbents through cold atmospheric plasma. Batch kinetics and isotherm studies were carried out to evaluate the effect of contact time, initial CPX concentration, adsorbent dosage, pH and temperature. The adsorbents were characterized by ATR-FTIR, N2 sorption, SEM and XRD, while several isotherm, kinetic and thermodynamic models were evaluated attempting to shed light on the adsorption mechanisms. CPX adsorption on both adsorbents was better described by Langmuir model, with an adsorption capacity of 112.36 mg/g for palygorskite and 11.79 mg/g for bauxite. Thermodynamics revealed the endothermic and the spontaneous character of the process, indicating chemisorption as the main adsorption mechanism for both adsorbents. The pseudo-second-order and the Elovich models fitted satisfactorily the adsorption onto bauxite, while adsorption onto palygorskite was well presented by Weber–Morris model, indicating that pore diffusion is also involved in the process. The adsorption capacity of both minerals decreased significantly after being used for several adsorption cycles and then almost completely recovered (regeneration efficiency was 99.6% and 98% for palygorskite and bauxite, respectively) inside a novel cold plasma microbubble reactor energized by high-voltage nanopulses, revealing the potential of these adsorbents to be reused. In addition to the regeneration of the adsorbents, the cold plasma completely eliminated the CPX transferred from the solid to the aqueous phase during the regeneration process.

Keywords

• Antibiotics
• Wastewater treatment
• Adsorption
• Adsorbent regeneration
• Cold atmospheric plasma
• Plasma bubbles