Key Design Parameters Analysis and Calculation Theory Research on Bending Performance of Steel–UHPC Lightweight Composite Deck Structure

Abstract

This paper aims to study the influence of key design parameters (e.g., reinforcement ratio, cover thickness, stud spacing, and thickness of the ultra-high-performance concrete (UHPC) layer) on the longitudinal and transverse bending performance, as well as the cracking load and ultimate bearing capacity calculation theory of steel–UHPC lightweight composite deck (LWCD) structure. Four transverse bending tests and four longitudinal bending tests on steel–UHPC composite plates and steel–UHPC composite beams were conducted, respectively. The refined finite element models of components with different key design parameters based on ABAQUS were established. The influences of different key design parameters on the transverse and longitudinal flexural behaviors (e.g., load-mid-span displacement curve, cracking stress, stiffness, elastic limit load, critical slip load, ultimate bearing capacity and ductility) were compared and analyzed in detail. The ultimate bearing capacity can be improved by increasing the thickness of UHPC layer and the reinforcement ratio of longitudinal reinforcement, and reducing the cover thickness and the spacing of studs. According to the longitudinal bending characteristics of the steel–UHPC lightweight composite deck structure, the calculation formulas for the cracking load and the ultimate bearing capacity of the steel–UHPC composite beam are proposed, and the calculated values are in good agreement with test results (the errors are basically within 10%), which is convenient for practical engineering applications.

Keywords

• steel–UHPC lightweight composite deck
• design parameters
• calculation theory
• bending performance
• crack width