Optimizing Hot-Work Tool Steel Microstructure for Enhanced Toughness

Abstract

Hot-work tool steels play a crucial role in applications exposed to extreme thermal, mechanical, and chemical stresses and require exceptional properties such as high strength, hardness, wear resistance, and toughness. The latter is crucial to prevent an unexpected tool failure due to the formation and propagation of fatigue cracks in demanding environments. In addition, high thermal conductivity is crucial to prevent overheating of the tool and the resulting degradation of the material. This study focuses on a new generation hot-work tool steel with increased Mo and W contents, which has excellent thermal conductivity but limited toughness, as it contains stable Mo-W carbides that remain stable up to 1100 °C. To improve toughness, an alternative heat-treatment method involving austempering at different temperatures was applied. The investigation begins with the characterisation of the chemical composition of the steel, followed by the determination of the martensite-start (MS) and martensite-finish (Mf) temperatures. Based on the results, the researchers established a set of samples for austempering heat treatment. They investigated the effects of different isothermal holding temperatures on the microstructure of the steel and its subsequent mechanical properties. The results show that reduced bainite formation, achieved by austempering at certain temperatures, led to significantly improved impact toughness and moderate hardness. This study also showed a correlation between the isothermal holding temperature and the extent of martensitic transformation, which affected the microstructure and mechanical properties of the steel.

Keywords

• hot-work tool steel
• austempering
• bainitic transformation
• lower bainite
• impact toughness