3D Porous MXene Aerogel through Gas Foaming for Multifunctional Pressure Sensor
Yongfa Cheng,
Li Li,
Zunyu Liu,
Shuwen Yan,
Feng Cheng,
Yang Yue,
Shuangfeng Jia,
Jianbo Wang,
Yihua Gao,
Luying Li
Affiliations
Yongfa Cheng
Wuhan National Laboratory for Optoelectronics (WNLO), Huazhong University of Science and Technology (HUST), Luoyu Road 1037, Wuhan 430074, China
Li Li
Wuhan National Laboratory for Optoelectronics (WNLO), Huazhong University of Science and Technology (HUST), Luoyu Road 1037, Wuhan 430074, China
Zunyu Liu
Wuhan National Laboratory for Optoelectronics (WNLO), Huazhong University of Science and Technology (HUST), Luoyu Road 1037, Wuhan 430074, China
Shuwen Yan
Wuhan National Laboratory for Optoelectronics (WNLO), Huazhong University of Science and Technology (HUST), Luoyu Road 1037, Wuhan 430074, China
Feng Cheng
Information Materials and Intelligent Sensing Laboratory of Anhui Province, Key Laboratory of Structure and Functional Regulation of Hybrid Materials of Ministry of Education, Institutes of Physical Science and Information Technology, Anhui University, Hefei 230601, China
Yang Yue
Information Materials and Intelligent Sensing Laboratory of Anhui Province, Key Laboratory of Structure and Functional Regulation of Hybrid Materials of Ministry of Education, Institutes of Physical Science and Information Technology, Anhui University, Hefei 230601, China
Shuangfeng Jia
School of Physics and Technology, Center for Electron Microscopy, MOE Key Laboratory of Artificial Micro- and Nano-Structures and the Institute for Advanced Studies, Wuhan University, Wuhan 430072, China
Jianbo Wang
School of Physics and Technology, Center for Electron Microscopy, MOE Key Laboratory of Artificial Micro- and Nano-Structures and the Institute for Advanced Studies, Wuhan University, Wuhan 430072, China
Yihua Gao
Wuhan National Laboratory for Optoelectronics (WNLO), Huazhong University of Science and Technology (HUST), Luoyu Road 1037, Wuhan 430074, China
Luying Li
Wuhan National Laboratory for Optoelectronics (WNLO), Huazhong University of Science and Technology (HUST), Luoyu Road 1037, Wuhan 430074, China
The development of smart wearable electronic devices puts forward higher requirements for future flexible electronics. The design of highly sensitive and high-performance flexible pressure sensors plays an important role in promoting the development of flexible electronic devices. Recently, MXenes with excellent properties have shown great potential in the field of flexible electronics. However, the easy-stacking inclination of nanomaterials limits the development of their excellent properties and the performance improvement of related pressure sensors. Traditional methods for constructing 3D porous structures have the disadvantages of complexity, long period, and difficulty of scalability. Here, the gas foaming strategy is adopted to rapidly construct 3D porous MXene aerogels. Combining the excellent surface properties of MXenes with the porous structure of aerogel, the prepared MXene aerogels are successfully used in high-performance multifunctional flexible pressure sensors with high sensitivity (306 kPa-1), wide detection range (2.3 Pa to 87.3 kPa), fast response time (35 ms), and ultrastability (>20,000 cycles), as well as self-healing, waterproof, cold-resistant, and heat-resistant capabilities. MXene aerogel pressure sensors show great potential in harsh environment detection, behavior monitoring, equipment recovery, pressure array identification, remote monitoring, and human-computer interaction applications.
