Tribo-Dependent Photoluminescent Behavior of Oleylamine-Modified AgInS₂ and AgInS₂-ZnS Nanoparticles as Lubricant Additives

Abstract

The content of Cu2+ in lubricants is an essential indicator for determining the quality of the lubricant and predicting mechanical failure. Finding an effective and sensitive method for detecting Cu2+ in lubricants is of great importance in oil monitoring. In this work, AgInS2 (AIS) and AgInS2-ZnS (ZAIS) nanoparticles (NPs) were synthesized by a simple one-step approach via in-situ surface modification by oleylamine. The as-synthesized AIS and ZAIS NPs exhibit good dispersion stability in various apolar media. The photoluminescence (PL) of AIS and ZAIS NPs as lubricating additives could reflect and monitor the lubrication state of steel-copper pairs due to the quenching effect of Cu2+ from the friction process. With an optimum concentration of 0.5 wt% in paraffin oil, the friction coefficient of the AIS and ZAIS NPs at 100 N was decreased by 56.8 and 52.1% for steel-steel contacts, respectively. ZAIS was observed to be more effective than AIS in improving anti-wear (AW) and extreme pressure (EP) properties, with a load-bearing capacity of up to 1100 N. Characterization of the wear tracks by SEM and XPS indicates that a tribofilm composed of metal sulfides and oxides was formed during the lubricating process. This work not only reveals AIS and ZAIS NPs as a new class of promising candidates for lubricating additives but also unveils their potential for monitoring lubricant conditions and exploring lubricant service life.

Keywords

• AgInS₂
• AgInS₂-ZnS
• lubricant additive
• friction and wear
• photoluminescence