Numerical Modeling of Concrete Deep Beams Made with Recycled Aggregates and Steel Fibers

Abstract

A bilinear tensile softening law that can describe the post-cracking behavior of concrete made with recycled concrete aggregates (RCAs) and steel fibers was developed based on an inverse analysis of characterization test data. Numerical simulation models were developed for large-scale concrete deep beams. The tensile softening laws along with characterization test results were used as input data in the analysis. The numerical deep beam models were validated through a comparative analysis with published experimental results. A parametric study was conducted to investigate the effect of varying the shear span-to-depth (a/h) ratio, steel fiber volume fraction (vf), and the presence of a web opening on the shear response. Results of the parametric study indicated that the shear strength gain caused by the addition of steel fibers at vf of 1 and 2% was higher in the deep beam models with a lower a/h of 0.8, relative to that of their counterparts with a/h of 1.6. The effect of a/h on the shear strength gain of the solid deep beam models diminished at the higher vf of 3%. The solid deep beam models with a/h of 0.8 exhibited a shear strength gain of 78 to 108% due to the addition of steel fibers, whereas their counterparts with the web opening experienced a reduced shear strength gain of 45 to 70%.

Keywords

• numerical modeling
• steel fibers
• recycled concrete aggregates
• deep beam
• tensile softening
• shear behavior