Partial Miscibility and Concentration Distribution of Two-Phase Blends of Crosslinked NBR and PVC

Abstract

We found that the blends of nitrile butadiene rubber (NBR) and polyvinyl chloride (PVC) exhibited lower critical solution temperature (LCST)-type phase behavior in which a single-phase blend tends to phase separate at elevated temperatures when the acrylonitrile content of NBR was 29.0%. The tan δ peaks, which originated from the glass transitions of the component polymers measured by dynamic mechanical analysis (DMA), were largely shifted and broader in the blends when the blends were melted in the two-phase region of the LCST-type phase diagram, suggesting that NBR and PVC are partially miscible in the two-phase structure. The TEM-EDS elemental mapping analysis using a dual silicon drift detector revealed that each component polymer existed in the partner polymer-rich phase, and the PVC-rich domains consisted of aggregated small PVC particles the size of several ten nanometers. The partial miscibility of the blends was explained by the lever rule for the concentration distribution in the two-phase region of the LCST-type phase diagram.

Keywords

• blend
• NBR
• PVC
• phase diagram
• partial miscibility
• DMA