Definition of a thermal conductivity map for geothermal purposes

Abstract

Abstract The use of geothermal energy is spreading globally due to its many advantages, especially for heating and cooling. The correct design of a geothermal system requires knowledge of the parameters of the subsoil rocks, and particularly the thermal conductivity (k), which is the intrinsic ability of a material to transfer thermal energy as a result of a temperature gradient. A thermal conductivity map of the geological formations is time-consuming to produce, but can be of great help when selecting the location of a low-enthalpy geothermal installation, resulting in significant savings and an increase in the efficiency of that installation. The preferred option for determining k is an in situ thermal response test, but laboratory methods may be an alternative if it is not available or affordable. In this work, the needle thermal probe method has been used to measure the k of representative outcropping rocks in Oviedo (NW Spain), since it allows to obtain a rapid determination, its cost is comparatively low and it can be implemented in a portable device. 162 measurements have been carried out on a total of 27 samples, ranging from 0.2 (clay) to 5.4 W m−1 K−1 (quartzite). A relationship has been found between the k of the rocks and their characteristics, such as mineralogy, anisotropy or geological age and a thermal conductivity map was created.

Keywords

• Rock thermal conductivity
• Geothermal applications
• Thermal conductivity map