Numerical Analysis on the Effect of the Conduction Band Offset in Dion–Jacobson Perovskite Solar Cells

Abstract

Benefiting from the advantages of a high absorption coefficient, a long charge diffusion length, excellent carrier mobility, and a tunable bandgap, three-dimensional (3D) metal halide perovskites exhibit great potential for application in solar cells. However, 3D perovskite solar cells (PSCs) often suffer from poor long-term stability against moisture, heat, and light. To address this issue, reducing the dimension of perovskite and forming two-dimensional (2D) perovskites can be effective in slowing down the oxidation of the perovskite film and significantly improving device stability. In this study, 2D PSCs were designed with glass/FTO/TiO2/Dion–Jacobson (DJ) perovskite/NiOx/Au structures, based on the solar cell simulation software SCAPS. The absorption layers employed in the study included PeDAMA2Pb3I10, PeDAMA3Pb4I13, PeDAMA4Pb5I16, and PeDAMA5Pb6I19. The influence of the conduction band offset (CBO) variation in the range of −0.5 to 0.5 eV on cell performance was explored through a numerical simulation. The simulation results indicate that the open-circuit voltage and fill factor continue to increase, whereas the short-circuit current density remains almost unchanged when the CBO increases from −0.5 eV to 0 eV. The devices exhibit better performance when the value of the CBO is positive and within a small range. For DJ PSCs, controlling the CBO within 0.1–0.4 eV is conducive to better cell performance.

Keywords

• solar cell
• two-dimensional perovskites
• SCAPS
• conduction band offset
• performance