Performance of BDS-2/3, GPS, and Galileo Time Transfer with Real-Time Single-Frequency Precise Point Positioning

Abstract

Single-frequency (SF) receivers are much cheaper than that of dual-frequency (DF). Even though DF precise point positioning (PPP) is nowadays applied in the time community, the cost of equipment is one of the key considerations for time users. Furthermore, the hardware delay calibration of single-frequency devices is simpler than that of dual-frequency devices. In addition, there is no literature to study real-time SF PPP time transfer. In this contribution, the possibility of time transfer using SF PPP was studied. The Un-combined SF PPP was employed for time transfer with ionospheric-constraint using real-time precise products. In this case, 18 multi-GNSS experiment (MGEX) stations and one time lab station were used to study real-time SF PPP time transfer using GPS, Galileo and BDS-2/3 satellites with 20-day. The results suggested that real-time single-frequency PPP can meet time transfer. the standard deviation (STD) of the clock difference obtained from GPS-only, Galileo-only and BDS-2/3 single-frequency PPP are about (0.51, 0.54, 0.91) ns, respectively. The frequency stability of real-time single-frequency PPP can achieve (1E-12, 1E-13, 1E-13) level at short-term and (1E-13, 1E-13, 1E-14) level at long-term, respectively, for BDS-2/3, Galileo-only and GPS-only based.

Keywords

• real-time
• BDS-2/3
• GPS
• Galileo
• single-frequency
• time transfer