Microstructural and Mechanical Property Analyses of Ti/Al/Ti Laminated Composites Prepared by Ultrasonic Welding

Abstract

Ti/Al/Ti laminated composite material is an ideal material for high-temperature parts and protective armor in the aerospace field because of its high specific strength and high temperature oxidation resistance. To improve the joint strength, the ultrasonic welding solid-phase joining technology is used to prepare Ti/Al/Ti laminated composites. The results show that the temperature, microstructure and microhardness distribution of the aluminum interlayer are uniform after welding. The recovery recrystallization behavior reduces the hardness of the aluminum interlayer during welding, while the microstructure and microhardness of the upper and lower titanium layers do not change significantly. The tensile shear failure positions of the joints are all located in the lower Al/Ti interface layer, and the highest tensile shear strength reaches 124.4 MPa (1200 W). At this parameter, the plastic constraint reinforcement effect is the most significant, the interface exhibits a small amount of vortex-like morphology, and the local area of the aluminum material melts below the equilibrium melting point. When the welding power reaches 1400 W, the upper surface of the weld is crushed, and the TiAl2 IMC phase precipitates in the Ti/Al interface region.

Keywords

• Ti/Al/Ti laminated material
• ultrasonic welding
• microstructure
• constraint reinforcement effect
• IMC phase