Enhanced X-ray Visibility of Shape Memory Polymer Foam Using Iodine Motifs and Tantalum Microparticles

Abstract

Shape memory polymer (SMP) foams are porous materials with high surface area and large volumetric expansion capabilities that are well suited for endovascular occlusion applications, including brain aneurysm embolization. However, many polyurethane SMP foams are inherently radiolucent when X-ray visibility is required to ensure the safe delivery of the foam to the targeted aneurysm site using fluoroscopy. Here, highly radio-dense tantalum microparticles were added to a previously reported triiodobenzene-containing SMP foam (ATIPA foam) premix to fabricate ATIPA foam-tantalum composites (AT_T). The AT_T foams showed comparable glass transition temperatures, faster expansion profiles, increased X-ray visibility, good cytocompatibility, and faster oxidative degradation compared to the control ATIPA foam without tantalum. The mechanical properties were improved up to 4 vol% tantalum and the X-ray visibility was most appropriate for the 2 vol% (AT_2%T) and 4 vol% (AT_4%T) tantalum foams. E-beam sterilization did not impair the critical properties of the ATIPA foams. Overall, AT_2%T was the optimal foam composition for neurovascular prototypes due to its high oxidative stability in vitro compared to previous low-density SMP foams. The AT_T foams are very promising materials with high toughness and sufficient X-ray visibility for use as neurovascular embolization devices.

Keywords

• shape memory polymer foam
• X-ray visibility
• tantalum microparticles
• neurovascular embolization device
• intracranial aneurysm