Applied Sciences (Jan 2022)
Nonlinear Dynamics Suppression of Bending Deflection in a Composite Laminated Plate Using a Beam Stiffener Due to Critical Buckling Load and Shear Force
Abstract
In this paper, the nonlinear dynamics behavior of the bending deflection of a stiffened composite laminated plate is suppressed using beam stiffeners at different fiber volume fractions and different aspect ratios. The non-periodic motion and chaos in a stiffened composite laminated plate is detected using the largest Lyapunov exponent parameter and power density function of a fast Fourier transform (FFT). The critical buckling load is calculated at different thickness ratios, numbers of stiffeners, lamination angles and stiffener–depth ratios based on different boundary conditions. The nonlinear response of the bending deflection is analyzed analytically, numerically and experimentally. The analytic solution has been derived using Levy and Navier solutions of classical laminate plate theory at different boundary conditions (CLPT). The numerical simulation was conducted using the ANSYS program while the experiment test was carried out using a strain gauge through a strain meter device. Experimentally, a Southwell plot is used to investigate the value of the critical buckling load. The combined loading are the in-plane compression mechanical load and shear force. All the values of the largest Lyapunov exponent are positive, which gives indication to non-periodic motion and chaos. The nonlinear dynamics behavior of the bending deflection is decreased with the increasing of number of stiffeners in which the value of largest Lyapunov exponent has been decreased. The nonlinear dynamics behavior is increased with the increasing of aspect ratios and fiber volume fractions. The system with an aspect ratio (2.5) and fiber volume fraction (υf = 80%) for an un-stiffened plate is more chaotic than the other systems.
Keywords
