Analysis of the Mechanical Performance and Durability of Adhesively Bonded Joints Used in the Milling Tool Industry

Abstract

Epoxy adhesives, widely used in multiple structural applications, are used in the milling tool industry to replace brazing and mechanical fastening when joining the cutting bits to the tool body; though their durability is still a concern. This work aims to evaluate and characterise the effect of environmental factors associated with a tool’s life cycle on the performance of these bonded joints. A gravimetric analysis was conducted on bulk adhesive plates for water, cutting emulsion and dielectric fluid to obtain diffusion and relaxation rates. Novel real joint shear specimens were developed to enable strength testing on joints which are comparable with the final application. These specimens were immersed in fluids and subjected to thermal cycles or a corrosive finishing surface treatment to simulate the tool’s life cycle. The joint’s resistance was then benchmarked. Lastly, a dimensional variation test was carried out on tool prototypes before and after ageing, showing no significant dimensional variation which could compromise the cutting performance of the tool. Overall, though it was possible to identify a decrease in strength of around 20% in most tests, joint strength was still within the values necessary for safe operation, with a large safety factor still being retained.

Keywords

• structural adhesives
• milling tools
• hygrothermal ageing
• Fourier transform infrared spectroscopy
• durability