Whole-rock trace element analyses via LA-ICP-MS in glasses produced by sodium borate flux fusion

Abstract

Abstract Trace elements provide crucial information about the origin and evolution of the Earth. One common issue regarding their analyses is the reduced analyte recovery during hot plate acid digestion for some geological samples. To overcome this, alkali fluxes (e.g., Lithium borate) have been used to produce an homogeneous synthetic glass that can be used then for both X-ray fluorescence (XRF) and laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). In this sense, we developed a method for LA-ICP-MS whole rock trace element analyses in glasses prepared by mixing high-purity sodium tetraborate and rock powders at high-temperature. We selected six international reference materials including peridotite (JP-1), basalt (BRP-1), kimberlite (SARM-39), pyroxenite (NIM-P), diorite (DR-N) and andesite (JA-1). Glasses were produced in a fully automatic fusion machine with step heating. Run products analyses were carried out on a Thermo® Element2 SF-ICP-MS coupled to a New Wave Research® Nd:YAG (213 nm) laser ablation system and on a Thermo® Element XR ICP-MS coupled to an Analyte G2 (193 nm) LA system. Results show that glasses are homogeneous and there is good agreement (generally > 90%) between our data and literature values for most trace elements, including large ion lithophile elements (LILE), high-field strength elements (HFSE) and rare-earth elements (REE).

Keywords

• laser ablation inductively coupled plasma mass
• trace elements
• geochemistry