Ceramics-Silikáty (Jun 2015)

PURIFIED WASTE FCC CATALYST AS A CEMENT REPLACEMENT MATERIAL

  • Danute Vaiciukyniene,
  • Audrius Grinys,
  • Vaitkevicius Vitoldas,
  • Kantautas Aras

Journal volume & issue
Vol. 59, no. 2
pp. 103 – 108

Abstract

Read online

Zeolites are commonly used in the fluid catalytic cracking process. Zeolite polluted with oil products and became waste after some time used. The quantity of this waste inevitably rises by expanding rapidly oil industry. The composition of these catalysts depends on the manufacturer and on the process that is going to be used. The main factors retarding hydration process of cement systems and modifying them strength are organic compounds impurities in the waste FCC catalyst. The present paper shows the results of using purified waste FCC catalyst (pFCC) from Lithuania oil refinery, as Portland cement replacement material. For this purpose, the purification of waste FCC catalyst (FCC) samples was treated with hydrogen peroxide. Hydrogen peroxide (H2O2) is one of the most powerful oxidizers known. By acting of waste with H2O2 it can eliminate the aforementioned waste deficiency, and the obtained product becomes one of the most promising ingredients, in new advanced building materials. Hardened cement paste samples with FCC or pFCC were formed. It was observed that the pFCC blended cements developed higher strength, after 28 days, compared to the samples with FCC or reference samples. Typical content of Portland cement substituting does not exceed 30 % of mass of Portland cement in samples. Reducing the consumption of Portland cement with utilizing waste materials is preferred for reasons of environmental protection.

Keywords