Apparatus for swelling deformation of compacted bentonite utilizing multi-ring moulds for evaluation of dry density and water content distribution

Abstract

In the geological disposal of high-level radioactive waste, bentonite buffer materials are required to have self-sealing property, which is the ability to fill gaps by swelling deformation between the buffer material and the waste containment vessel or surrounding bedrock. Self-sealing property was evaluated based on the pressure generated after the gap filling under the assumption of constant dry density and water content in the specimen and buffer material. On the other hand, it takes tens to hundreds of years for the transitional period until the buffer contacts with groundwater, fills the gap, and the internal state converges to a uniform state. To assess changes more accurately in the condition of the buffer material, it is necessary to evaluate time courses in the density and water content of the buffer material because of groundwater infiltration and swelling deformation. From these, the authors developed an experimental apparatus for swelling deformation of bentonite, which consists of a mould with 2 mm-thick stacked rings. It is aimed to evaluate the distribution of dry density, water content, and degree of saturation inside the specimen by cutting the specimen with a 2 mm thick ring after the end of experiment. In this paper, results of preliminary experiments to confirm the applicability of this apparatus to swelling deformation test of bentonite was firstly described. Then, experiments were conducted on compacted bentonite specimens using this apparatus, and changes in the dry density and water content distribution inside the specimens were evaluated in terms of swelling deformation behaviour.

Keywords

• bentonite
• swelling deformation
• multi-ring mould
• geological disposal