Interfacial Stress Development and Cracking Susceptibility during Laser Powder Bed Fusion of Random TiB₂-Particle-Reinforced AlSi10Mg Matrix Composites

Abstract

A sequentially coupled multi-phase thermo-mechanical model for laser powder bed fusion (LPBF) of Al-based composites reinforced by 1 wt.% random TiB2 micron particles was established. Due to the remarkable difference in thermophysical properties, the maximum thermal stress was predicted at the TiB2/Al matrix interface and formed at the liquid–solid transition stage. Meanwhile, complicated evolution curves of temperature, strain, and strain rate were predicted with the laser moving time during the solidification stage. To evaluate the interface cracking susceptibilities of micron-TiB2/AlSi10Mg composites, the flow stress of the matrix was calculated, instead of ultimate tensile strength, based on the physical constitutive relationship. From the comparison between the calculated flow stress and the simulated Von Mise equivalent stress, it was found that an increase in TiB2 particle size was inclined to induce a larger interfacial stress than the calculated flow stress, therefore increasing the interfacial crack tendency, which was also effectively verified by the experimental results.

Keywords

• laser powder bed fusion
• Al-based composites
• interface crack
• simulation and modeling