Effect of Thermo-Mechanical Processing on Initiation and Propagation of Stress Corrosion Cracking in 304L Austenitic Stainless Steel

Abstract

Despite the high corrosion resistance of austenitic stainless steels (SSs), a significant reduction of stress corrosion cracking (SCC) resistance has been reported in cases of high residual stress and metastable microstructural features. In this study, the effect of thermo-mechanical processing (TMP) on the initiation and propagation of SCC in 304L SS was studied. To better understand the SCC mechanisms, three TMPs conditions—welded, solution annealed at 1050 °C for tens of seconds, and straightened—were used. The research focused on analyzing the initial microstructure, residual stress, and hardness along the depth direction to assess SCC resistance and establish correlations with the observed SCC modes. Experimental results demonstrated that transgranular SCC was observed in regions exhibiting elevated residual stress induced by welding and straightening processes. Furthermore, the presence of strain-induced martensite transformation and slip bands formed during plastic deformation were identified as additional factors contributing to the susceptibility of SCC. The study findings highlighted that the magnitude and distribution of residual stresses, in conjunction with microstructural evolution, could be varied depending on the specific TMP condition, leading to different SCC susceptibilities, cracking modes, and directions.

Keywords

• stress corrosion cracking
• residual stress
• austenitic stainless steel
• SCC mode
• microstructural evolution