Al-Khawarizmi Engineering Journal (Mar 2019)

Desalination of Highly Saline Water Using Direct Contact Membrane Distillation (DCMD)

  • Salah S. Ibrahim,
  • Noor A. Mohammad Ameen

DOI
https://doi.org/10.22153/kej.2018.12.005
Journal volume & issue
Vol. 14, no. 2

Abstract

Read online

In this work, laboratory experiments were carried out to verify direct contact membrane distillation system’s performance in highly saline water desalination. The study included the investigation of various operating conditions, like feed flow rate, temperature and concentration of NaCl solution and their impact on the permeation flux were discussed. 16 cm2 of a flat sheet membrane module with commercial poly-tetra-fluoroethylene (PTFE) membrane, which has 0.22 μm pore size, 96 µm thickness and 78% average porosity, was used. A high salt rejection factor was obtained greater than 99.9%, and the permeation flux up to 17.27 kg/m2.h was achieved at 65°C for hot feed side and 20°C for cold side stream.