Process modeling and simulation of Gmelina arborea (GmW) and Mansonia altissima (MaW) wood drying

Abstract

This study simulate the process modeling of drying characteristics of Gmelina arborea (GmW) and Mansonia altissima (MaW) wood under the influence of various process variables such as drying time, drying temperature, and airflow velocity. GmW and MaW moisture desorption isotherms, kinetics, and thermodynamics were also studied. Five (5) thin-layer and desorption isotherm drying models were used to model the moisture ratio and water activity data from the process. According to the anatomical analysis, the GmW sample has an average lumen size of 147.44 m, indicating a high moisture content. The results showed that the Guggenheim, Anderson, and de Boer (GAB) model with the lowest sum of squared error value (0.046) demonstrated the best-fit to the experimental desorption data for GmW samples and the Henderson-P model for MaW samples, while the Demir et al. model emerged as the best kinetics model fit for describing the moisture desorption isotherm and thin-layer drying kinetics. GmW effective diffusivity (Deff) values ranged from 3.671 × 10−8 to 5.378 × 10−8 m2/s and MaW effective diffusivity (Deff) values ranged from 2.923 × 10−8 to 4.678 × 10−8 m2/s. GmW and MaW activation energies were 252.702 kJ/mol and 313.604 kJ/mol, respectively. The thermodynamic studies revealed that the heat and mass transfer coefficients varied linearly with temperature, as the change in enthalpy (ΔH) and change in entropy (ΔS) decreased while the Gibbs free energy (ΔG) increased. The results obtained from this study demonstrated that the proposed drying process modeling and simulation approach could be successfully applied to investigate the wood drying phenomena. The information can be used to reduce the drying costs and improve the wood quality.

Keywords

• Drying
• Moisture desorption isotherm
• Thin-layer kinetic model
• Gmelina arborea
• Mansonia altissima
• Wood