Ni–Cr dental alloys - porcelain firing impact on corrosion properties and surface characteristics

Abstract

Biocompatibility is a critical aspect of the use of materials in the human body. The use of base metal alloys in dentistry is primarily regulated by health and safety standards set by regulatory authorities in various countries. The porcelain-fused-to-metal (PFM) process applied to Ni-Cr dental alloys can alter their properties, particularly in terms of corrosion and surface characteristics. This study aimed to assess the effect of the heat processing used for dental porcelain firing on these properties. The two casted alloys: Ceramic N and Ivoclar Vivadent 4all, used in the study were characterized by analyzing the microstructure by scanning electron microscopy (SEM), composition with energy dispersive x-ray spectroscopy (EDS), hardness, surface profile and electrochemical corrosion resistance (E _corr , j _corr , polarization curve, E _br and electrochemical impedance spectroscopy (EIS) results), as well as ions release before and after the simulated porcelain firing. Based on the conducted research the following conclusions can be drawn: Analyzes of the material characteristics before and after the simulation showed that the discussed process, although it does not cause the formation of chemical impurities on the surface of the alloys, results in changes in the chemical composition and structure of surface oxides, increases roughness and reduces hardness. The results of the corrosion examinations showed a deterioration in anti-corrosion properties after the simulation. The statistically significant decrease in corrosion resistance may result from the increased heterogeneity of the surface oxide layers and partial changes in their composition.

Keywords

• Ni-Cr alloys
• dental porcelain firing
• corrosion
• roughness
• hardness