Foods (Oct 2022)

Effects of Cross-Linking on Physicochemical and Film Properties of Lotus (<i>Nelumbo nucifera</i> G.) Seed Starch

  • Ankita Chandak,
  • Sanju Bala Dhull,
  • Sneh Punia Bangar,
  • Alexandru Vasile Rusu

DOI
https://doi.org/10.3390/foods11193069
Journal volume & issue
Vol. 11, no. 19
p. 3069

Abstract

Read online

Lotus seed starch was cross-linked using sodium trimetaphosphate (STMP) in varying amounts (1, 3, and 5%), and its rheological, pasting, thermal, and physicochemical properties were investigated. These cross-linked lotus seed starches (CL-LS-1, CL-LS-3, CL-LS-5) were also used to produce films (CL-LSFs), which were then examined for their mechanical characteristics, water vapor permeability, moisture content, opacity, thickness, and water solubility. After cross-linking, the solubility, amylose content, and swelling power of all the starch samples decreased. Cross-linking resulted in an increased pasting temperature, while peak viscosity (PV) decreased, with CL-LS-5 exhibiting the lowest peak viscosity (1640.22 MPa·s). In comparison to native starch, the thermal characteristics of CL-LS demonstrated greater gelatinization temperatures (To, Tp, Tc) and gelatinization enthalpy (ΔHgel). The gelatinization enthalpy of CL-LS varied between 152.70 and 214.16 J/g, while for native LS the value was 177.91 J/g. Lower moisture content, water solubility, and water vapor permeability were observed in the CL-LSFs. However, the cross-linking modification did not produce much effect on the film thickness. The highest tensile strength (12.52 MPa) and lowest elongation at break (26.11%) were found in CL-LSF-5. Thus, the starch films’ barrier and mechanical qualities were enhanced by cross-linking.

Keywords