High Temperature Materials and Processes (Dec 2021)

Study on manganese volatilization behavior of Fe–Mn–C–Al twinning-induced plasticity steel

  • Lan Fang-jie,
  • Zhuang Chang-ling,
  • Li Chang-rong,
  • Chen Jing-bo,
  • Yang Guang-kai,
  • Yao Han-jie

DOI
https://doi.org/10.1515/htmp-2021-0049
Journal volume & issue
Vol. 40, no. 1
pp. 461 – 470

Abstract

Read online

In the smelting process of high manganese steel, the volatilization of manganese will be accompanied. In this article, the volatilization of manganese in high manganese steel was studied by simultaneous thermal analyzer. The results show that the volatilization rate of manganese in high manganese steel increases with increasing temperature and holding time. It is proved by experimental study and data analysis that manganese volatilization follows the first-order kinetics model, and the empirical formula of manganese evaporation is derived. The volatile products of manganese were analyzed by scanning electron microscopy and X-ray photoelectron spectroscopy. It was found that the volatile components of manganese mainly consisted of MnO, Mn3O4, Mn2O3, and MnO2. Combined with thermodynamics, the mechanism of manganese volatilization is further analyzed, and two forms of manganese volatilization in high manganese steel are revealed. One is that manganese atoms on the surface of high manganese steel and oxygen atoms in the gas form different types of manganese oxides and then volatilize at high temperature. The other way is that Mn atoms vaporize into Mn vapor and evaporate in high temperature environment, and then are oxidized into different types of manganese oxides. The results of theoretical calculation and experiment show that manganese volatilization is mainly in the first form.

Keywords