Fabrication of Superhydrophobic/Superoleophilic Bamboo Cellulose Foam for Oil/Water Separation

Abstract

Water is an indispensable strategic resource for biological and social development. The problem of oily wastewater pollution originating from oil spillages, industrial discharge and domestic oil pollution has become an extremely serious international challenge. At present, numerous superwetting materials have been applied to effectively separate oil and water. However, most of these materials are difficult to scale and their large–scale application is limited by cost and environmental protection. Herein, a simple, environmentally friendly strategy including sol–gel, freeze–drying and surface hydrophobic modification is presented to fabricate a bamboo cellulose foam with special wetting characteristics. The bamboo cellulose foam is superhydrophobic, with a water contact angle of 160°, and it has the superoleophilic property of instantaneous oil absorption. Owing to the synergistic effect of the three–dimensional network structure of the superhydrophobic bamboo cellulose foam and its hydrophobic composition, it has an excellent oil–absorption performance of 11.5 g/g~37.5 g/g for various types of oil, as well as good recyclability, with an oil (1,2–dichloroethane) absorption capacity of up to 31.5 g/g after 10 cycles. In addition, the prepared cellulose–based foam exhibits an outstanding performance in terms of acid and alkali corrosion resistance. Importantly, owing to bamboo cellulose being a biodegradable, low–cost, natural polymer material that can be easily modified, superhydrophobic/superoleophilic bamboo cellulose foam has great application potential in the field of oily wastewater treatment.

Keywords

• wetting
• bamboo cellulose
• cellulose foam
• superhydrophobic/superoleophilic
• oil/water separation