Making large-size fail-safe steel by deformation-assisted tempering process

Abstract

Abstract Synergistically improving the strength and toughness of metallic materials is a central focus in the field of physical metallurgy. Yet, there is a noticeable lack of research in strengthening and toughening large-size metal components, whereas those components are extensively used in the modern industry. In this work, a deformation-assisted tempering (DAT) process was proposed to create a novel microstructure in 1.4 tons low-alloyed plain steel. After DAT treatment, the steel contains low dislocation density but high density of low-angle subgrain boundaries and dispersed spherical nano carbides. Such microstructure enables a much better combination of tensile strength and fracture toughness compared to the small-size quench and temper steels. The significant improvement in low-temperature impact toughness is due to the occurrence of delamination and subsequent large plastic deformation at the notch tip. The DAT process can provides a new strategy for the development of large-size fail-safe steel with excellent strength and fracture resistance.

Keywords

• Fail-safe
• Fracture toughness
• Low-alloy steel
• Warm deformation
• Mechanical properties